banner1
banner2
banner3
banner4

Why Buyers Choose Shanli Air Dryers

Built around your air quality Refrigerated, desiccant and combined dryers sized to your flow rate, working pressure and dew point. In-house R&D, documented quality inspection and OEM/ODM support for buyers worldwide since 1997.

  • Shanli experience since 1997

    Since 1997

    Years of dryer engineering

  • Shanli factory area

    30000+

    m² factory & production area

  • Shanli engineering team

    300+

    Staff, incl. 29 R&D engineers

  • Annual dryer and filter output

    10000+

    Dryers & filters supplied yearly

From Selection to Service: How We Work

  • Application Review & Sizing

    Tell us your flow rate, working pressure, inlet temperature and required pressure dew point. A 29-person R&D and technical team — including 3 senior engineers and 15 engineers — reviews the duty and recommends the right dryer technology for your site.

  • Manufacturing Capacity

    From a 30,000 m² plant, Shanli supplies more than 10,000 compressed air dryers and filters per year. Refrigerated, heatless, heated, blower-purge, modular and combined ranges are built in-house, so standard units and large project orders share the same production control.

  • Quality Inspection & Test Reports

    Incoming components are checked with precision test equipment, and every unit is inspected again before dispatch: air tightness, paint film, no-load commissioning, appearance, accessories and model/quantity verification, with photos kept on file. An inspection report is issued for every order.

  • Commissioning & After-Sales Support

    Service engineers support start-up, commissioning and troubleshooting, backed by a customer service network and liaison offices. Spare parts, operating guidance and remote technical support are available throughout the equipment life cycle.

  • OEM / ODM Customisation

    Sales and engineering teams build order-specific plans from your on-site conditions and technical requirements — air- or water-cooled, high temperature, high pressure, explosion-proof, inverter, PLC or microprocessor control — and support custom branding and documentation.

  • Shanli R&D and technical engineering team
  • Compressed air dryer assembly at Shanli factory
  • Quality inspection of a compressed air dryer
  • Shanli service engineer commissioning equipment
Shanli compressed air dryer manufacturing facility

Compressed Air Dryer & Filter Manufacturer Since 1997

Shanli designs and manufactures refrigerated compressed air dryers, heatless, heated, blower-purge and compressed-heat regenerative desiccant dryers, combined low-dew-point dryers, compressed air filters, self-cleaning suction filters, pre-coolers, after-coolers and water chillers. Units can be specified for air-cooled or water-cooled operation, high inlet temperature, high pressure, explosion-proof protection, inverter control and PLC or microprocessor control.

Every selection starts with the numbers that matter: flow rate in m³/min or cfm, working pressure, inlet and ambient temperature, and the target pressure dew point defined by ISO 8573-1. Our engineers match the dryer, pre-filtration and downstream filtration to those conditions — not the other way round.

  • Application Sizing
  • In-house R&D
  • Full-process QC
  • Global Service
  • OEM & ODM

Engineered for Critical Air Quality

Every dryer is checked before it leaves our Hangzhou plant: air tightness, paint film, no-load commissioning, appearance, accessories and model/quantity verification. Inspection photos are kept on file and a test report is issued with each order.

Incoming components are verified with precision test equipment before assembly. For non-standard duties — high inlet temperature, high pressure, explosion-proof protection, inverter or PLC control — our 29-person R&D team reviews the working conditions first, then releases an order-specific build plan.

What we size againstFlow rate · working pressure · inlet & ambient temperature · target pressure dew point · ISO 8573-1 air quality class

  • Compressed air dryer assembly detail
  • Shanli quality inspection workshop
Shanli compressed air dryer installation
APPLICATIONS & ENGINEERING

Compressed Air Dryer Applications by Industry

From sterile instrument air to battery dry rooms, every process demands a different pressure dew point. Shanli selects dryer technology against your air quality class, flow rate, working pressure and site conditions — serving pharmaceutical, shipbuilding, new energy, electronics, automotive and food & beverage plants — then supports it through manufacturing, commissioning and service.
  • Refrigerated compressed air dryer range
    +3 °C PDP
  • Desiccant & low-dew-point dryer range
    -40 °C PDP
  • Combined & custom-engineered systems
    ISO 8573-1
APPLICATIONS & ENGINEERING
SELECTION GUIDE

How to Choose the Right Compressed Air Dryer

Compare the three main dryer technologies by pressure dew point, flow rate and ISO 8573-1 air quality class — then send us your duty conditions for a sized recommendation.

Refrigerated Air Dryers
+3 °C PDP

Refrigerated Air Dryers

The economical choice for general plant and instrument air, where a pressure dew point around +3 °C keeps downstream pipework dry above freezing.
  • General plant & instrument air
  • Air-cooled or water-cooled models
  • Low energy and maintenance cost
Desiccant Air Dryers
-40 °C PDP

Desiccant Air Dryers

Heatless, heated and blower-purge desiccant dryers deliver low pressure dew points for outdoor pipework, cleanrooms and other critical processes.
  • Heatless, heated & blower purge
  • Outdoor and low-dew-point duty
  • Twin-tower and modular designs
Combined Air Dryers
ISO 8573-1

Combined Air Dryers

A refrigerated stage followed by desiccant drying keeps air quality stable across seasonal temperature swings and changing plant loads.
  • Refrigerated + desiccant stages
  • Stable across seasonal loads
  • Sized pre- and after-filtration

Not sure which technology fits your duty? Share your flow rate, working pressure and target pressure dew point — our engineers will size the dryer and the complete filtration chain.

Get a Sized Recommendation
Any inquiry, pls feel free to contact us.
Contact Us

Compressed Air Dryer FAQs

Answers to the questions buyers ask most — pressure dew point, sizing data, ISO 8573-1 air quality classes and what is checked before a dryer leaves our factory.

  • Refrigerated or desiccant air dryer - which one do I need?
    Choose by the pressure dew point your process requires. Refrigerated dryers are the economical choice for general plant and instrument air (typically around +3 C PDP), while heatless, heated and blower-purge desiccant dryers are specified for lower dew points, outdoor pipework and critical processes. Share your target dew point and we will recommend the right technology.
  • What information do I need to provide for a dryer quotation?
    Flow rate (m3/min or cfm), working pressure, inlet air temperature, ambient temperature, required pressure dew point, available power supply and cooling method (air or water). Your industry and site conditions also help us size the pre-filters and after-filters correctly.
  • Which standard defines compressed air dryness?
    ISO 8573-1 classifies compressed air purity by particles, water and oil, with pressure dew point defining the water class. Specifying pre-filtration, the dryer and downstream filtration together is what keeps a system inside the required class.
  • Can Shanli build dryers for non-standard working conditions?
    Yes. Our R&D and technical teams develop order plans from on-site working conditions and technical requirements, covering high inlet temperature, high pressure, explosion-proof, inverter and PLC-controlled designs, as well as OEM and ODM projects.
  • What quality checks are performed before shipment?
    Each unit goes through air-tightness, paint film, no-load commissioning, appearance and accessory checks before leaving the factory, and an inspection report is issued for every order.

Send Us Your Requirements

Share your flow rate, working pressure and target pressure dew point. Our technical team will review your duty conditions and reply with a sized recommendation within 24 hours.

whatsapp

Phone

E-mail

Inquiry