Industrial Oil Water Separator Oil Water Separators For Wastewater Treatment

Product Characteristics

● R22 refrigerant and tube heat exchanger are used for more than 80 cubic meters; the gas-liquid separator adopts a patented three-stage separation method of "direct collision separation, low-speed centrifugal separation and stainless steel wire mesh demisting separation", which will remove 99.9% of the liquid The moisture is separated from the cooled compressed air to prevent the secondary evaporation of moisture and ensure the low dew point quality of the finished gas;

 

Working Principle

Hot and moist compressed air first enters the pre-cooler to lower the temperature. Then the air flows into the evaporator for deep cooling, where water vapor condenses into liquid water. Separated water is drained automatically. After drying, the cold air passes through the heat exchanger and is reheated before being delivered to the pipeline.

 

Applicable Working Conditions

Design Working Conditions

01. Pre-sale: The main responsibilities of the sales and Research Institute are to review the technical and business solutions, provide business and technical support to customers, and can accurately and timely solve all business and technical requirements before sales.

02. On sale: The main responsibilities of the Ministry of Commerce are order management and customer management. The core of order management is order delivery, business review of the scheme, and order. Timely solve the problems in the execution of the contract, and communicate with customers in order processing and delivery.

03. After-sale: Strong and perfect after-sales service network, there are 9 customer service centers in major regions of China, each center has professional service engineers, a total of more than 50 people, quickly and timely solve problems in after-sales service, such equipment start-up debugging, and troubleshooting.

If you need, please feel free to contact us for more information. Email: shanli@hzsljh.com

1. Q: Can the dryer be started/stopped frequently?

A: Not recommended; interval ≥ 3 minutes to protect compressor.

2. Q: Abnormal control panel display?

A: Check power, wiring, display and main board.

8. Maintenance (76–85)

3. Q: Daily inspection items?

A: Pressure, temperature, drainage, abnormal noise, leakage, alarms.

4. Q: Monthly maintenance?

A: Clean drains, check refrigerant pressure, tighten terminals, clean condenser.

5. Q: Quarterly maintenance?

A: Clean heat exchangers, check filter differential pressure, inspect piping.

6. Q: Annual maintenance?

A: Replace filter drier and elements, leak test, full electrical inspection.

7. Q: What to record in maintenance log?

A: Date, parameters, replaced parts, fault treatment.

8. Q: How to store during long shutdown?

A: Disconnect power, close valves, drain water, dry and ventilated, test run periodically.