Deck Air Compressor Air Dryer
video

Deck Air Compressor Air Dryer

With taking advantage of the surface absorbability of porous solid material, the heated regeneration air dryer is a kind of equipment, which can absorb the moisture to get satisfied air with lower dew point, air dryer and better cleanliness
Send Inquiry
Product Introduction

 

Products Description

filter dryer ac PB series

The working principle of a low-temperature adsorption dryer is based on the use of molecular sieves as an adsorbent. In this process, the adsorbent materials absorb all the water vapor from the compressed air stream, leaving behind dry air. The dryer then regenerates the adsorbent material by heating it to a high temperature, which drives out the accumulated moisture, enabling it to be used again. This type of dryer is reliable, efficient, and ensures stable performance, making it an ideal choice for various industrial applications.

 

Heated desiccant air dryers 2

 

Products Specification

Air capacity range:0.5-600Nm3/min ,working pressure range:0.6-1.6Mpa,dew point:-20~ -70℃,

regenerative desiccant air dryer :

Working Principle of compressed air filter dryer/air compressor filters and dryers/air compressor filter dryer

With taking advantage of the surface absorbability of porous solid material, the heated regeneration air dryer is a kind of equipment, which can absorb the moisture to get satisfied air with lower dew point, air dryer and better cleanliness.

It adopts active alumina, whose diameter is almost same with water molecule, as the adsorbent, it's also in line with the world advanced pressure swing adsorption (PSA) principle, that is to say, when absorbing in normal temperature, the pressure of water molecule in air is big than that in desiccant, so the former will be sucked into the desiccant, then condense to water drop, meanwhile the liberated heat will be stored at the upside of the tower. As regenerating, in order to temporary lower the desiccant absorption ability to let the water molecule effuse out, about 7% dry air will go through the regeneration tower slowly after the air being heated up to 150℃, the stored heat also will take part in regeneration process for energy saving. For the circular employ of absorption-regeneration-absorption, the desiccant dries compressed air continuously to get deeply dried air. The technical performance already has reached the international high-level standard. It can be you ideal equipment with dew point lowering than -40℃.

The working alternating cycle of twin tower can ensure stable output of satisfied compressed air. Its pressure dew point which can make up to -40℃ is definitely can obtain deeply dry and oil-free compressed air with high purity to meet the customer high requirements. Due to the heater, it can keep good regeneration performance with less purge air loss.

 

Design conditions: working pressure: 7bar, inlet temperature: 38℃, pressure dew point: -20℃

 

adsorption dryer for air compressor characteristics

 

High efficiency and energy saving;

Working pressure dew point -20ºC~-40ºC;

Equipped with PLC controller with excellent performance, which can realize chain function;

High-quality switching valve, stable and reliable, can ensure the integrity of the work process and prolong the working life of components;

Choosing Special adsorbents with high hygroscopic uniform shape and size, high strength, low output dew point, less dust generated, and long service life

 

 

Products Details

 

adsorbent1

Special adsorbent

diffuser1111

diffuser

solenoid valve1

solenoid valve

 

 

Our Service

 

1.Fault diagnosis and quick troubleshooting

Professional engineers support remote fault diagnosis. We analyze alarm codes, unstable dew point, high temperature protection and freezing problems and give clear solving plans soon.

2.Return and exchange support for quality problems

If confirmed quality defects appear during normal use, we support reasonable return, replacement and re-delivery rules following international trade after-sale standards.

3.Energy optimization and parameter adjustment service

We provide free secondary parameter adjustment according to customer actual air flow, ambient temperature and workshop load to make dryers more energy-saving balanced quiet suitable.

 

 

FAQ

 

1. Q: Monthly maintenance?

A: Clean drains, check refrigerant pressure, tighten terminals, clean condenser.

2. Q: Quarterly maintenance?

A: Clean heat exchangers, check filter differential pressure, inspect piping.

3. Q: Annual maintenance?

A: Replace filter drier and elements, leak test, full electrical inspection.

4. Q: What to record in maintenance log?

A: Date, parameters, replaced parts, fault treatment.

5. Q: How to store during long shutdown?

A: Disconnect power, close valves, drain water, dry and ventilated, test run periodically.

6. Q: Heat exchanger cleaning interval?

A: Air-cooled: quarterly; water-cooled: descale every 3–6 months.

 

Hot Tags: deck air compressor air dryer, China deck air compressor air dryer manufacturers, suppliers, factory, desiccant air dryer for museums, desiccant air dryer for food industry, easy to install desiccant air dryer, desiccant air dryer for hunting trips, desiccant air dryer for restaurants, desiccant air dryer for forestry

Send Inquiry

whatsapp

Phone

E-mail

Inquiry