Industrial Air Dryer Compressor Machine
video

Industrial Air Dryer Compressor Machine

Products Video Products Description Product Characteristics ● R22 refrigerant and tube heat exchanger are used for more than 80 cubic meters; the gas-liquid separator adopts a patented three-stage separation method of "direct collision separation, low-speed centrifugal separation and stainless...
Send Inquiry
Product Introduction

 

Products Description

Product Characteristics

The refrigeration system of the cold dryer starts its closed‑loop cycle with the compression process. The refrigerant compressor sucks in low‑pressure, low‑temperature refrigerant vapor from the evaporator and compresses it into high‑pressure, high‑temperature superheated vapor. During compression, mechanical work is converted into thermal energy, causing a significant rise in refrigerant temperature. The compressor must maintain stable pressure and rotational speed to ensure continuous and reliable cooling capacity. Any fluctuation in compression performance directly affects the dew point of the dried air. This process provides the driving force for the entire refrigeration cycle and determines the cooling intensity available for condensing water vapor in the compressed air. Proper lubrication and cooling of the compressor are essential to avoid overheating and ensure long‑term stable operation.

 

Working Principle

The amount of water vapor in the compressed air is determined by the temperature of the compressed air: under the condition that the pressure of the compressed air is basically unchanged, reducing the temperature of the compressed air can reduce the content of water vapor in the compressed air, and the excess water vapor will condense into liquid.

Air Dryer for Compressor Refrigerated

 

Products Specification
Applicable Working Conditions

 

Max inlet temp

60°C

Pressure dew point

2℃~10℃

Environment temperature range

5°C-50°C

Cooling mode

Air-cooled

Pressure range

0.6-1.6Mpa ( 0.5-12Nm³/min )

Cryogen

0.5~2 Nm/min is R134a, 3~12Nm3/min is R410a,

0.6-1.0 Mpa (15Nm³/min and above )

15~80Nm/min is R407C, 80 Nm/min and above is R22

 

Design Working Conditions

 

Inlet air temperature

38°C

Working pressure

0.7Mpa

Ambient temperature

38℃

Cooling water temperature

≤32℃

 

 

 

Our Service

 

We pay attention to environmental protection and provide recycling and environmental disposal service for used filters, filter elements, and packaging materials to reduce environmental impact. Our after-sales team collects waste equipment and consumables according to environmental standards, classifies and processes them harmlessly, and recycles available materials. For users who regularly replace a large number of parts, we provide regular recycling arrangements to avoid random disposal that may cause pollution. This service fulfills corporate social responsibility, helps users achieve green management, and complies with environmental protection regulations, making the use of filters more environmentally friendly and standardized.

 

FAQ

 

1. Q: How to maintain air-cooled condenser?
A: Clean fins quarterly, keep clean.

2. Q: Notes for water-cooled condenser?
A: Clean water, regular descaling, sufficient cooling water flow.

3. Q: Abnormal compressor noise?
A: Bearing wear, valve damage, liquid slugging, loose mounting.

4. Q: What is liquid slugging and how to avoid it?
A: Liquid refrigerant entering compressor; avoid by ensuring superheat, checking expansion valve.

5. Q: Consequences of wrong refrigerant type?
A: Poor cooling, abnormal pressure, compressor damage.

6. Q: Does the system need oil?
A: Add only after leak repair; do not overfill.

 

Hot Tags: industrial air dryer compressor machine, China industrial air dryer compressor machine manufacturers, suppliers, factory, premium refrigerated air dryer, portable refrigerated air dryer, manual refrigerated air dryer, refrigerated air dryer for commercial applications, compressed air drying refrigerated air dryer, efficient refrigerated air dryer

Send Inquiry

whatsapp

Phone

E-mail

Inquiry