Air Filter For Air Dryer Compressor

oil separator filter compressor Characteristics

When the filter is blocked or the filter cake is too thick, the backwashing and regeneration cleaning process is activated to restore the filter's working performance. The system automatically switches the fluid flow direction, letting clean filtered fluid flow backward from the outlet to the inlet, scouring the filter medium and filter screen at a higher pressure. The reverse high-speed fluid impacts the filter cake and intercepted impurities, detaching them from the medium surface and discharging them through the sewage outlet. During backwashing, auxiliary methods such as air scrubbing or ultrasonic vibration can be combined to enhance the cleaning effect, thoroughly removing stubborn impurities inside the medium pores. The backwashing time and intensity are controlled by a program to ensure thorough cleaning without damaging the filter medium. After cleaning, the pressure difference returns to the normal range, the filter resumes forward filtration, and this regeneration process greatly extends the service life of the filter element and reduces operating costs.

 

 

 

"*" means product grade: HC, HT, HA, HF, HH.

This series of precision filters, the filter element production adopts the technology of American HANKISON company.

The filter element accuracy is based on ISO8573.

It should be specified when ordering. The processing capacity under different pressure conditions should be corrected according to the coefficient in the correction coefficient table.

compressed-air-filter ,

capacity:0.5 to 12.8NM3/Min

above capacity 15NM3/Min

compressed air filter

Filter with differential pressure gauge

With technological advancement and changes in user demand, we provide system upgrade and performance optimization service for filters to improve efficiency and adapt to new working conditions. Our technical team evaluates the current operating status, fluid treatment requirements, and environmental changes, then proposes targeted optimization plans, such as upgrading control modules, improving backwashing systems, replacing higher-precision media, or adjusting flow distribution structures. After optimization, the filter has higher energy efficiency, lower operating cost, stronger impurity removal capacity, and longer stable operation cycle. This service allows old equipment to maintain advanced performance and extend its overall service life.

1. Q: Is frequent compressor cycling normal?
A: No; check sensor, thermostat, load fluctuation.

2. Q: Can the dryer run 24 hours continuously?
A: Yes, designed for continuous duty.

3. Q: Will low-load operation damage the dryer?
A: No; hot gas bypass or VFD is recommended to avoid freezing and low pressure.

4. Q: Is slight vibration normal?
A: Yes; severe vibration requires tightening base and motor bolts.

5. Q: When does the fan start?
A: Starts at set condensing temperature; standard on air-cooled models.

.