For Compressor Air Dryer Filter

Integr folded symmetric trip aligned cascade headed raw rough crash coarse drift bleed huge stone iron scrap thick cotton hair stiff stick wet glue base gravity fall reserved tilted slope instant gather bottom large drain manual semi electric float sealed anti reversed bad blow folded again second medium clip thin ash split balanced radial uniform hole locked even cross latent micro fog hover transparent cannot naked focus intercept bend thin ultra close mesh third ultimate pure white steril faint odor adjusted light food drink pharm strict arrive meet grade dry neat colour fixed box sheet iron spray static proof dust outside adhere period pull door inspect replace cartridge cheap spend fewer fund stretch aged lengthen companion behind cold dryer host twin line twin rise feed balance belong normal modern updated wired smart plc panel hd read data real reflect idle peak judge follow devote shrink bite waste recover exchange friend industry car laser cut close cycle zero add physical principle aer curve blade less rotate same blow quiet basement narrow height logic mechanic merge compound condensed drop reply differ urgent unstable coast summer trop thick hot moist crowded scaled ongoing harder typical southeast africa cross border year twenty break pause intervene risk rust stuck weaken split apart therefore carefully calculate symmetrical against erode adapt tall rough far arrive blurred fit popular middle small moderate folded light slim fashionable cross mult.

 

 

 

(1) oil separator filter compressor Product Specifications

"*" means product grade: HC, HT, HA, HF, HH.

This series of precision filters, the filter element production adopts the technology of American HANKISON company.

The filter element accuracy is based on ISO8573.

It should be specified when ordering. The processing capacity under different pressure conditions should be corrected according to the coefficient in the correction coefficient table.

compressed-air-filter ,

capacity:0.5 to 12.8NM3/Min

above capacity 15NM3/Min

compressed air filter

Filter with differential pressure gauge

01. Pre-sale: The main responsibilities of the sales and Research Institute are to review the technical and business solutions, provide business and technical support to customers, and can accurately and timely solve all business and technical requirements before sales.

02. On sale: The main responsibilities of the Ministry of Commerce are order management and customer management. The core of order management is order delivery, business review of the scheme, and order. Timely solve the problems in the execution of the contract, and communicate with customers in order processing and delivery.

03. After-sale: Strong and perfect after-sales service network, there are 9 customer service centers in major regions of China, each center has professional service engineers, a total of more than 50 people, quickly and timely solve problems in after-sales service, such equipment start-up debugging, and troubleshooting.

If you need, please feel free to contact us for more information. Email: sales2@hzsljh.com

1. Q: Does low inlet pressure affect drying?

A: Yes, lower pressure reduces capacity and worsens dew point.

2. Q: Function of hot gas bypass valve?

A: Stabilizes low pressure, prevents evaporator freezing, ensures stable dew point.

3. Q: Causes of unstable dew point?

A: Large load fluctuation, sensor drift, unstable refrigerant pressure.

4. Q: Why does performance degrade over time?

A: Fouled heat exchanger, refrigerant leakage, compressor wear, clogged filters.

5. Q: Is a post-filter useful?

A: Yes, further removes oil and dust, protects end-use equipment.

4. Drainage System (31–40)

6. Q: Why does the auto drain not work?

A: Clogged, stuck float, solenoid fault, no pressure.

Factory Tour