Nov 29, 2022 Leave a message

How To Adjust The Temperature Of The Refrigerated Dryer?

Freeze dryer is mainly used in medicine, food and other fields. During the freeze-drying process, the temperature must be controlled within a certain range required by the process through sublimation water. This requires that the pilot scale freeze dryer has some precise temperature control capabilities to solve the temperature control problem of the pilot scale freeze dryer. So how to adjust the temperature of the refrigerated dryer? Now let me explain the temperature regulation method of the freezing dryer.


The freezing dryer is used in medicine, biological products, food processing, health food and other fields. In the process of freeze-drying, the temperature of liquid products must be controlled within a certain range required in the process of cooling and pre freezing liquid products, and then sublimating the water in solid products. This requires that the pilot freeze dryer has some precise temperature control functions


Considering that the refrigeration compressor has excessive refrigeration capacity, the refrigeration branch that can provide sufficient refrigeration capacity provides a refrigeration system for the front box of the pilot refrigeration dryer to meet the refrigeration capacity requirements during temperature regulation.


When adjusting the temperature, the refrigeration compressor cools the two evaporators with different evaporation temperatures. Therefore, the influence on the refrigeration compressor may increase due to the delay of expansion valve control caused by the difference of working conditions. You need to fully understand the control of the return steam pressure, because the hydraulic hammer of the refrigeration compressor will cause failures. Today's engineers add a solenoid valve to the return steam pipe of the front box evaporator, and use the pressure controller to apply pressure to the front and rear of the solenoid valve. Monitoring is insufficient to control the opening and closing of the valve to reduce the impact of load during temperature regulation and ensure smooth operation of the compressor.


In order to ensure the temperature control effect and prevent the pressure rise of the front box evaporator due to the closing of the solenoid valve, the engineer added a steam return branch pipe to the steam return pipe in front of the solenoid valve connected to the refrigeration compressor. The second stage compressed air suction pipe of the machine is carried out in several freezers and dryers, which proves the feasibility of the treatment scheme. This not only avoids the additional cost of the temperature control unit, but also solves the problem that the temperature control of the capillary tube is not ideal through the temperature control effect and its impact on the compressor load.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry