Shanli · Hangzhou, China · Since 1997

Compressed Air Dryer Manufacturer

Since 1997, Shanli has engineered refrigerated, desiccant and combined compressed air dryers in its own Hangzhou factory. Every unit is sized around your flow rate, working pressure, inlet temperature and target pressure dew point, then run-tested before shipment.

Six product families0.5–600 Nm³/min+10 °C to -70 °C PDPISO 8573-1 sizing
Compressed Air Dryer Manufacturer

Product Range

Browse Six Compressed Air Treatment Product Families

Six product families cover nearly every compressed air treatment duty: refrigerated, desiccant and combined dryers, filters and separators, pre-coolers and after-coolers, and water chillers. Use the categories to compare specifications, then send us your duty data for model selection.

The full model list below is updated with new specifications and configurations. Open any product for detailed parameters, or send your duty data for a confirmed selection.

Why Choose Shanli

Six Reasons Buyers Specify Shanli Air Dryers

Buying an air dryer is a long-term decision. In-house vessel fabrication, documented ISO 9001 quality control, dew point verification and a final run test keep every unit traceable, while nine service centres support commissioning and troubleshooting after delivery.

Manufacturing since 1997

Nearly three decades of dryer and pressure vessel production, with the current 30,000 m² plant in the Renhe advanced manufacturing base.

In-house fabrication & QC

Vessel welding, assembly, painting, control panel integration and performance testing are completed in our own workshop, not outsourced.

Verified dew point performance

Refrigerant circuit checks, dew point verification, electrical safety tests and a final run test are documented under ISO 9001 procedures.

Certified management systems

ISO 9001, ISO 14001 and ISO 45001 certification, CE and EAC product compliance, plus national high-tech enterprise recognition.

Engineering depth

A 29-person R&D and technical team develops high-performance zero-purge, modular and large-flow dryers and supports custom specifications.

Service after commissioning

Nine customer service centres and more than 50 service engineers handle start-up, commissioning and troubleshooting across export markets.

1997Manufacturer since
30,000 m²Factory area
300+Employees
600Nm³/min max capacity
20+Export countries
9Service centres

Product Applications

Air Dryers Installed Across Six Process Industries

These installations show how the same product families are configured for different duties. Flow capacity, inlet temperature, ambient conditions and the required ISO 8573-1 air quality class determine whether a refrigerated, desiccant, combined or heat-of-compression design is the right match.

Shanli compression heat air dryer installed at a steel plant in Saudi Arabia
Project reference

Steel Industry · Saudi Arabia

Compression heat regenerative dryer for a 500 Nm³/min steel plant air system, delivering a -20 °C to -40 °C pressure dew point.

500 Nm³/min · -20 to -40 °C PDP · Steel
Engineers inspecting Shanli refrigerated air dryer piping at a Thailand rubber plant
Project reference

Rubber Industry · Thailand

Refrigerated air dryer rated for 90 Nm³/min with a maximum inlet temperature of 60 °C, protecting rubber processing equipment from condensate.

90 Nm³/min · 60 °C inlet · Rubber
Shanli refrigerated compressed air dryer installed in an Indonesia power plant
Project reference

Power Generation · Indonesia

Refrigerated dryer handling 67 Nm³/min at up to 60 °C inlet temperature for a power plant instrument air and service air network.

67 Nm³/min · 60 °C inlet · Power plant
Twin-tower Shanli desiccant air dryer at an automotive plant in Iran
Project reference

Automotive · Iran

Blower heat regeneration desiccant dryer supplying 160 Nm³/min of -20 °C to -40 °C air for automotive paint and assembly lines.

160 Nm³/min · -20 to -40 °C PDP · Automotive
Stainless steel Shanli adsorption dryer vessels at a new energy plant in Russia
Project reference

New Energy · Russia

Heat of compression regenerative dryer rated at 500 Nm³/min for a new energy production line requiring continuous low-dew-point air.

500 Nm³/min · -20 to -40 °C PDP · New energy
Shanli refrigerated air dryer cabinets serving a high-end electronics plant in England
Project reference

High-end Electronics · England

Refrigerated dryer supplying 53 Nm³/min in a 5 °C to 50 °C environment for electronics manufacturing where stable dry air protects product yield.

53 Nm³/min · 5–50 °C ambient · Electronics

More installation references, including power plants, semiconductor lines and shipyards, are documented in our project case library.

Solutions

Configured Air Treatment Solutions, Not Single Boxes

Rather than sell a single box, we build the complete air treatment train around your process. Choose a standard plant-air package, a low-dew-point system, a high-temperature or explosion-proof build, or a skid-mounted OEM configuration with matched filtration and cooling.

Shanli refrigerated air dryer cabinets installed at a bulk handling project in Vietnam

General Plant Air Package

A refrigerated dryer with matched pre-filter and after-filter delivers a stable pressure dew point for workshops, packing lines and pneumatic tools at the lowest running cost.

Shanli desiccant air dryer towers installed at a Qingdao power plant

Low Dew Point Process Air

Desiccant, combined or heat-of-compression designs reach -20 °C to -70 °C for instrumentation, electronics, semiconductors and outdoor pipelines in freezing climates.

Large custom Shanli air dryer at an Indian power plant site

High-Temperature & Hazardous Duty

High inlet temperature, high pressure, water-cooled, stainless-steel and explosion-proof builds, with PLC or variable-frequency control for chemical and petrochemical sites.

Blue Shanli air treatment units installed at a metal processing plant in Shanghai

Complete Air Treatment Train & OEM

Dryers, filters, separators, pre-coolers, after-coolers and water chillers supplied as one skid-mounted train, including OEM builds for integrators and engineering contractors.

Customization Process

From Duty Data to a Commissioned Custom Dryer

Custom builds follow the same documented route as standard orders. Share your duty data, and our engineers apply the inlet temperature, pressure and ambient correction factors before recommending a model, preparing drawings and building the unit under our QC programme.

  1. Share your duty data

    Flow rate, working pressure, inlet and ambient temperature, current cooling stages and the required pressure dew point or ISO 8573-1 class.

  2. Engineering review & sizing

    Sales and research teams review the technical scheme and apply inlet temperature, pressure and ambient correction factors to the selection table.

  3. Configuration & quotation

    We confirm air or water cooling, control method, materials, explosion-proof rating and matched filtration, then issue drawings and a commercial offer.

  4. In-house fabrication & QC

    Pressure vessel fabrication, assembly, painting, control panel integration and documented inspection under ISO 9001 procedures.

  5. Run test & packing

    Refrigerant circuit, dew point, electrical safety and final run test are recorded before the unit is protected for shipment.

  6. Delivery & after-sales

    Order management covers delivery and contract execution, while service engineers support start-up, commissioning and troubleshooting.

Shanli technician assembling pipework during final air dryer inspection

Selection support: published correction tables cover inlet temperature from 30 °C to 60 °C, working pressure from 0.4 to 1.0 MPa and ambient temperature from 20 °C to 50 °C. See the full selection and service guide.

FAQ

Sizing, Specification and Service Questions Answered

Buyers usually ask the same sizing and specification questions before placing an order. These answers cover the data our engineers need, the difference between refrigerated and desiccant drying, available pressure dew points, special materials and the support provided after commissioning.

What information do you need to select the right air dryer?

Send the flow rate in Nm³/min, working pressure, inlet and ambient temperature, existing pre-cooler or after-cooler details, and the pressure dew point or ISO 8573-1 class you need. We apply the inlet temperature, pressure and ambient correction factors before confirming a model.

Refrigerated or desiccant dryer: which one should I choose?

Refrigerated dryers deliver a pressure dew point around +3 °C for general plant air at the lowest energy cost. Choose a desiccant, combined or heat-of-compression design when the process needs -20 °C to -70 °C, or when ambient and piping conditions fall below freezing.

What pressure dew point and capacity can Shanli equipment cover?

Published performance spans +10 °C to -70 °C pressure dew point and 0.5 to 600 Nm³/min treatment capacity. Matched filtration covers 10 ppm down to 0.003 ppm residual oil and 3 µm to 0.01 µm outlet particle size.

Can you build high-temperature, high-pressure or explosion-proof dryers?

Yes. Air-cooled or water-cooled, high-temperature, high-pressure, stainless-steel, fluorine-free and explosion-proof builds are available, with instrument, single-chip, PLC, industrial PC or variable-frequency control. Core fabrication stays in our own plant.

Do you supply complete air treatment systems and OEM configurations?

Yes. Dryers can be paired with compressed air filters and separators, pre-coolers, after-coolers and water chillers as one skid-mounted train, and we support OEM and custom builds for equipment integrators and engineering contractors.

What support is available after delivery?

Nine customer service centres and more than 50 service engineers handle equipment start-up, commissioning and troubleshooting. Our sales and technical teams also provide scheme review, order management and technical documentation before and during contract execution.

Shanli engineers checking a control panel at a semiconductor customer site

Still deciding between two models?

Send the duty data and our engineers will compare the options, including energy use, purge loss and the filtration stages needed for your ISO 8573-1 air quality class.

Ask an Engineer

whatsapp

Phone

E-mail

Inquiry