1000 Cfm Refrigerated Air Dryer

Name: China 1000 Cfm Refrigerated Air Dryer Manufacturers Suppliers Factory - Wholesale Service - Shanli Purify Equipment
Brand: SHANLI
SKU: 212422816

Shanli air dryer is an efficient heat exchanger that can be used in a wide range of industries. Its biggest advantage is that the heat transfer effect is good, can quickly remove the water in the air, so that the air is more dry. At the same time, the structure of the product is compact and beautiful, not only easy to use, but also to create a better working environment for enterprises. In addition, the component design of the Air dryer is very convenient to disassemble, and the replaceable ability is particularly strong, which makes it easier in daily maintenance and maintenance, effectively extending the service life of the product. In general, Air dryer is a very practical and efficient equipment, with a wide range of applications, which can help enterprises improve work efficiency, improve product quality, and meet the needs of modern enterprises to save energy and reduce consumption.

Send Inquiry

Product Introduction

Products Description

Product Characteristics

● Ensure the normal operation of the equipment at the ambient temperature of 50℃;
0.5-80 cubic meters use environmentally friendly refrigerant; use a three-in-one plate or plate-fin heat exchanger ,collecting three
functions of the regenerator, the evaporator and the gas-liquid separator , with good heat exchange effect, compact and beautiful
structure; modular refrigeration components. Convenient for disassembly and repair, strong replaceability

Equipment Selection table

●The equipment selection under different working conditions can be calculated by the following formula:
Selection processing capacity = actual processing capacity + (coefficient C1x coefficient C2x coefficient C3)

According to DIN IS07183, the design of the refrigeration dryer is based on the following parameters, the intake air temperature is 38C,
the ambient temperature is 38C, and the working pressure is 0.7Mpa.
Pressure loss:≤3% of the design pressure. For different working pressure and temperature, the following correction factors should be
considered when selecting.

Products Specification

Applicable Working Conditions

Max inlet temp	60°C	Pressure dew point	2℃~10℃
Environment temperature range	5°C-50°C	Cooling mode	Air-cooled
Pressure range	0.6-1.6Mpa ( 0.5-12Nm³/min )	Cryogen	0.5~2 Nm/min is R134a, 3~12Nm3/min is R410a，
Pressure range	0.6-1.0 Mpa (15Nm³/min and above )	Cryogen	15~80Nm/min is R407C, 80 Nm/min and above is R22

Design Working Conditions

Inlet air temperature	38°C	Working pressure	0.7Mpa
Ambient temperature	38℃	Cooling water temperature	≤32℃

Air dryer for compressor refrigerated (plate fin type)

Item Model	Air capacity （Nm³/min）	Voltage （V）	Fan Power （W）	Air connection pipe diameter	N.W （kg）	L （mm）	W （mm）	H （mm）	Air volume （Nm³/h）
SDLF-0.5	0.65	220	40	G1"	34	400	560	730	410
SDLF-1	1.2	220	40	G1"	36	400	560	730	410
SDLF-2	2.5	220	50	G1"	45	520	640	890	820
SDLF-3	3.6	220	85	G1"	54	520	640	890	1000
SDLF-4.5	5.0	220	165	G1-1/2"	60	540	700	1000	1850
SDLF-6	6.8	220	165	G1-1/2"	65	540	700	1000	1850
SDLF-8	8.5	220	170	G2"	76	610	900	1070	3700
SDLF-10	10.9	380/220	150	G2"	88	610	900	1070	3700
SDLF-12	12.8	380/220	150	G2"	88	610	900	1070	3700
SDLF-15	16	380/220	380	DN65	255	1170	920	1420	7600
SDLF-20	22	380/220	380	DN65	260	1170	920	1420	7600
SDLF-25	26.8	380/220	460	DN80	290	1170	920	1420	9000
SDLF-30	32	380/220	840	DN80	350	1400	1200	1600	12500
SDLF-40	43.5	380/220	1100	DN100	485	1400	1200	1600	15000
SDLF-50	53	380/220	920	DN100	800	1600	1200	1600	18000
SDLF-60	67	380/220	920	DN125	1000	1600	1400	1650	18000
SDLF-80	90	380/220	2200	DN125	1280	1800	1500	1770	30000

Products Details

Title

Our Service

01. Pre-sale: The main responsibilities of the sales and Research Institute are to review the technical and business solutions, provide business and technical support to customers, and can accurately and timely solve all business and technical requirements before sales.

02. On sale: The main responsibilities of the Ministry of Commerce are order management and customer management. The core of order management is order delivery, business review of the scheme, and order. Timely solve the problems in the execution of the contract, and communicate with customers in order processing and delivery.

03. After-sale: Strong and perfect after-sales service network, there are 9 customer service centers in major regions of China, each center has professional service engineers, a total of more than 50 people, quickly and timely solve problems in after-sales service, such equipment start-up debugging, and troubleshooting.

If you need, please feel free to contact us for more information. Email: shanli@hzsljh.com